Kidde
10-Year Sealed Battery Combination Smoke and CO Detector with Intelligent Wire-Free Voice Interconnect (2-pack)
$138.00

N/A

Carbon Monoxide Analyzer

This Kidde 10-Year Worry Free Battery Wireless Combination CO and Smoke Alarm features voice alert and wireless interconnectivity. Powered by a 10-year battery that lasts the life of the alarm, no battery installation or replacement is necessary. An 'end of life' warning will alert you when it is time to replace the entire unit. The voice alarm announces the type of hazard detected and indicates when the Smart Hush feature has been activated. This alarm features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. You can even install this smoke and carbon monoxide detector in a detached garage or workshop and be alerted by another detector in the house. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.Shop all Kidde Smoke Detectors here.

  • Kidde and the American red cross aim to reduce home fire deaths and injuries
  • Powered by a non-replaceable, sealed lithium battery system; no battery installation or replacement is necessary for the life of the alarm
  • Alarm interconnects with other Kidde 10-year wire-free interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
  • Wire-free interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
  • Voice alarm announces 'fire', when a smoke or fire hazard is detected and announces warning carbon monoxide' when a CO hazard is detected
  • Internal timer reminds you to replace your unit after 10 years to ensure the most reliable protection
  • Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
  • Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
  • SmartBridge app and hub are not required for device to operate
  • Interconnect is not required; this alarm also functions as a stand-alone smoke and carbon monoxide detector
  • A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
  • 10-year limited warranty
  • Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
  • Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
  • Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 dB alarm when a hazard is detected
  • UL/CSFM reference model P4010DCSCO-W
  • Click here for more information on Electronic Recycling Programs

This Kidde 10-Year Worry Free Battery Wireless Combination CO and Smoke Alarm features voice alert and wireless interconnectivity. Powered by a 10-year battery that lasts the life of the alarm, no battery installation or replacement is necessary. An 'end of life' warning will alert you when it is time to replace the entire unit. The voice alarm announces the type of hazard detected and indicates when the Smart Hush feature has been activated. This alarm features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. You can even install this smoke and carbon monoxide detector in a detached garage or workshop and be alerted by another detector in the house. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.Shop all Kidde Smoke Detectors here.

  • Kidde and the American red cross aim to reduce home fire deaths and injuries
  • Powered by a non-replaceable, sealed lithium battery system; no battery installation or replacement is necessary for the life of the alarm
  • Alarm interconnects with other Kidde 10-year wire-free interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
  • Wire-free interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
  • Voice alarm announces 'fire', when a smoke or fire hazard is detected and announces warning carbon monoxide' when a CO hazard is detected
  • Internal timer reminds you to replace your unit after 10 years to ensure the most reliable protection
  • Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
  • Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
  • SmartBridge app and hub are not required for device to operate
  • Interconnect is not required; this alarm also functions as a stand-alone smoke and carbon monoxide detector
  • A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
  • 10-year limited warranty
  • Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
  • Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
  • Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 dB alarm when a hazard is detected
  • UL/CSFM reference model P4010DCSCO-W
  • Click here for more information on Electronic Recycling Programs

This Kidde 10-Year Worry Free Battery Wireless Combination CO and Smoke Alarm features voice alert and wireless interconnectivity. Powered by a 10-year battery that lasts the life of the alarm, no battery installation or replacement is necessary. An 'end of life' warning will alert you when it is time to replace the entire unit. The voice alarm announces the type of hazard detected and indicates when the Smart Hush feature has been activated. This alarm features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring. You can even install this smoke and carbon monoxide detector in a detached garage or workshop and be alerted by another detector in the house. This alarm is also compatible with the Kidde Smart Bridge app and hub (sold separately), which will send a message to your smart phone, tablet or PC alerting you to a potential threat.Shop all Kidde Smoke Detectors here.

  • Kidde and the American red cross aim to reduce home fire deaths and injuries
  • Powered by a non-replaceable, sealed lithium battery system; no battery installation or replacement is necessary for the life of the alarm
  • Alarm interconnects with other Kidde 10-year wire-free interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your home
  • Wire-free interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-W
  • Voice alarm announces 'fire', when a smoke or fire hazard is detected and announces warning carbon monoxide' when a CO hazard is detected
  • Internal timer reminds you to replace your unit after 10 years to ensure the most reliable protection
  • Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
  • Compatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threat
  • SmartBridge app and hub are not required for device to operate
  • Interconnect is not required; this alarm also functions as a stand-alone smoke and carbon monoxide detector
  • A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms; with 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules
  • 10-year limited warranty
  • Kidde offers a full range of 120-Volt AC wire-in life safety products with interconnect capability to provide the most immediate and complete system available, when any one interconnected alarm is triggered, all interconnected alarms within the home sound an immediate warning
  • Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
  • Smoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 dB alarm when a hazard is detected
  • UL/CSFM reference model P4010DCSCO-W
  • Click here for more information on Electronic Recycling Programs
Download Our Manuals

Currently no manuals available for this product. Please check product description or call our sales support team if you have any further queries.

Specifications

Dimensions

Product Depth (in.)
5
Product Height (in.)
2
Product Width (in.)
5

Details

Alarm Sensor Type
Photoelectric
Alarm Type
Carbon Monoxide,Smoke
Alarm/Detector Features
10-Year Battery,Hush Feature,Interconnected,Tamper Resistant,Voice Alert,Wire-free Interconnect
Battery Type Required
.Built-In
Commercial / Residential
Residential
Connector/Contact Type
None
Hub Required
No hub connection available
Included
Batteries
Pack Size
2
Power Options
Battery
Power Source
Battery
Remote Access
Remote Access
Requires Hub?
Hub Required for Remote Access
Returnable
90-Day
Smart Home
Smart Home Enabled
Smart Home Protocol
Wi-Fi
Voice Control Hub Required
No Voice Control
Voltage (volts)
3
Works With
No additional compatibility

Warranty / Certifications

Certifications and Listings
1-UL Listed

Tips & Assistance For Homeowners

Talk To An Expert - Forums On Home Issues
See All
requestaquote Get Free Quotes callnow 888-506-9527